How Roller Rotary Engrave Tumbler and Common Mistakes

Read Time:3 Minute, 27 Second

Steps of Tumbler Engraving

In engraving a stainless steel tumbler, you will need to follow these steps in order to get the best results. We are going to condense it while also making it simpler to comprehend.

First, Make Sure it’s Thoroughly Clean

The first thing you need to do is give the tumbler a thorough cleaning, making sure that it is free of any dust or other debris. Examine the tumbler to determine whether it is made of plastic or has another type of coated paint.

If that is not the case, you will need to colour it before spraying it with laser-protecting paint which is temporary. But, once the engraving process is complete, you will have the option to remove that.

The Next Step is to Take Measurements

It is of the utmost importance to accurately measure the tumbler since any mistakes in the measurements will prevent the etching from being repaired.

Be sure to count each of the sides and corners, then give the cutter the appropriate instructions based on your findings.

Now Adjust the Engraver’s Settings

After that, you will need to alter the settings of the engraver so that they correspond with the design that you have created. Both the power of the laser and the pace at which it operates is constantly subject to change, and this is determined by the material’s thickness as well as the level of complexity of the design.

On the other hand, you always have the option to go with the settings that were initially selected for you.

Place Tumbler on Rottery Roller

The tumbler should be positioned atop the rotating roller, and the height of the laser engraver should be adjusted correspondingly. In addition to this, you need to adjust the focus lever so that the precision is maintained at its highest possible level. After that, hit the beginning button.

Final Step

After the laser engraving is finished, you should wait sometime before retrieving the tumbler and putting it away. It is now possible to remove any temporary paint that may have been applied. Bingo!

If you want to learn more about Tumbler engraving and Roller Rotary, you should visit: thunderlaser.com

Common Mistakes Turing Tumebr Engraving

When using a laser engraver to engrave tumblers, these are some of the most typical blunders that individuals make.

Mistake# 1

Failure to clean the tumbler before engraving it can result in the design not being etched into the tumbler correctly by the laser. Tumblers should be cleansed of any dirt or debris before they are engraved.

An illustration of this may be seen in a post published by Printful. The author describes how one of their customers engraved a tumbler that had grit and dust on it, which caused the picture to be distorted.

Mistake# 2

Incorrectly centering the tumbler on the rotary attachment The tumbler needs to be placed correctly on the rotary attachment in order to ensure that the design is centred on the tumbler and that the pattern does not get deformed.

It is possible for the pattern to be thrown off centre or distorted if the tumbler is not properly centred. Here you can read more about the engraving process.

Mistake#3

Since you are not utilising the appropriate settings: In order to achieve the best possible results with the laser engraver, it is necessary to experiment with a variety of settings, which vary according to the material that the tumbler is made of.

For instance, a blog post written by Printful notes the fact that customers utilise the same settings for all types of materials, which results in engraving of low quality.

Mistake# 4

Incorrect use of the file format: The file format for the design ought to be in a vector format such as .svg or .eps. If this is not done, the design will not work properly.

When the design is engraved, the result will be sharp and unmistakable thanks to this step. When a raster file format is utilised, such as.jpg or.png, the design may become pixelated or distorted as a result of the use of the format.